Your present position:Home> Products>TSVG products

The centralized products The distributed products Auxiliary products TSVG products Smart Micro-grid
Container-type TSVG Series Product
The product description Data download

Product of container TSVG series contains three parts: starting container, power unit, and control room. The air vent is professional fixed shutter, which can prevent water from flowing into the device from any direction within range of 180° and stop access of large sand effectively, At the same time, the device is equipped with an outdoor air filter to stop micro dust;The lower air incoming type design can guarantee the container TSVG to be applied in bad weather such as serious sand blown, heavy salt mist, and extreme wind and snow to guarantee continual grid connection.

Technical advantages

The advanced professional container model is designed to adapt to the extreme weather conditions such as storm and desert
The innovation adopts FPGA to realize the system algorithm, which is more than the traditional SVG
Variable frequency speed regulation system, according to the chain section temperature automatically adjust the wind volume, reduce pollution, reduce noise, and save electricity
By means of independent control, harmonic extraction, full compensation mode, SVG has the function of reactive power compensation + harmonic control
TSVG high and low voltage cross control scheme to meet high and low voltage crossing requirements
The IGBT temperature is fully collected, and the temperature drop capacity can be achieved

Technical parameters

Steady-state control accuracy


Trouble shooting

Adopt redundancy design and satisfy automatic N-1 operation

Running mode

Constant reactive power mode, constant voltage mode, constant power factor mode, load compensation mode, power grid reactive integrated control mode

Communication interface


Communication protocol

Support IEC-103 and IEC-104 stipulation

Monitor mode


Human-computer interface

Chinese/English LED touch screen

 Signal transmission

Fiber-optic communication

Key technology and theory

Instantaneous reactive power theory, SPWM theory, capacitor voltage balance control technology, three-phase independent control

Modulation system

Single polarity double frequency technique, carrier phase-shifting SPWM technique

Power supply mode

Two-circuit feeding

Control source


Main protection function

SVG over-current, grid overvoltage, drive failure, water-cooling failurepower unit overvoltage, overcurrent, overheat and communication fault, etc.

 Connection mode

Y connection

 Cooling mode

Air cooling, water cooling

IP class

 Indoor: IP00

 Container: IP54

 Ambient temperature


 Storage environment temperature



3000m, it should be customized for 3000m5000m

Relative humidity

90, no condensation

Pollution grade

IV level

Specific parameters of outdoor container type

Boundary dimension (width*depth*height mm)


 Weight (kg)


 Executive standard

DL/T 1215.1-2013GB/T  14549-1993GB/T 17626.2-2006GB/T 17626.3-2006GB/T 17626.4-2008GB/T 17626.5-2008GB/T 17626.11-2008